Connecting a serial terminal to a BIG-IP or 3-DNS

Connecting a serial terminal to a BIG-IP or 3-DNS

Need to connect to the device via a console cable. One needs to know the settings to configure the serial terminal.

Solution:

1) Before booting the BIG-IP, attach a serial device to the serial port. This ensures that BIG-IP uses the serial port as the console.

2) Configure the serial terminal settings as follows:
9600 baud
8 bits
1 stop bit
no parity
no flow control
VT100 emulation

F5 SOL937
https://support.f5.com/kb/en-us/solutions/public/0000/900/sol937.html

Was this article helpful?

Related Articles

Leave A Comment?

You must be logged in to post a comment.